Introduction:
surface and flush mounting installation.And accord with IEC 60439-3 international standard.The box body and panel are
made of flame retardant ABS material. The small circular arc door can open up to 90 degrees.With galvanized din rail and
adjustable support,the depth of din rail can be adjusted to install different size MCB and RCD.
The Plastic Distribution Box tsm Consumer Unit should be placed in the power load center as far as possible to shorten the distribution line and reduce voltage loss. It should also be noted that the location of the selected electrical box should be conducive to maintenance, dry eye ventilation, good lighting, and does not affect the aesthetics of the building and the safety of the building structure.
1. The box is installed. 2. The air opening in the box, wiring wires, wiring ties, etc., have been prepared and conform to the design drawings and installation requirements of the distribution box.
Installation of the air opening in the Plastic Distribution Box tsm Consumer Unit
1. When installing the air opening, first pay attention to the position of the installation hole above the box cover and ensure that the air opening position is in the reserved position of the box cover. Secondly, switch installation should be arranged from left to right, switch reserved for a whole bit. 2. Reserved seats are generally placed on the right side of the distribution box. There is a complete bit reserved between the first row total circuit breaker and the split circuit breaker for the first row circuit breaker wiring.
Hot Tags: plastic distribution box tsm consumer unit, suppliers, manufacturers, factory, customized, wholesale, price, for sale, free sample
