Intriduction
Electrical distribution box using in high-end market, the overall panel design of this type distribution box is luxury and attractive.
The material is PC which is fire resistant and anti-UV protection. Two terminals(earth copper bar and neutral copper bar) in the box are easy for wiring and routing.
NUM：9 WAY
CLASS：Products
Outline And Installation Dimensions (LWHC)
Product | Model | Din-rail (mm) | Terminal bar | P) L*W*H (mm) | QTY/CTN | (C) W*H*D (mm) |
| LWHC-4 | 75 | 4+4 | 212X107X92 | 30 | 510X355X450 |
| LWHC-6 | 110 | 8+8 | 200X165X100 | 20 | 540X355X430 |
| LWHC-9 | 165 | 12+12 | 200X219X100 | 20 | 540X425X465 |
| LWHC-12 | 215 | 8+8 | 230X273X110 | 20 | 595X485X575 |
| LWHC-18 | 320 | 14+14 | 283X381X130 | 10 | 595X485X405 |
| LWHC-24 | 215*2 | 16*4 | 230X273X110 | 10 | 595X400X570 |
| LWHC-36 | 320*2 | 14*4 | 283X381X130 | 10 | 605X400X790 |
Details of threading and wiring stages: Conditions for threading:
1. In order to ensure the safety of finished products, the doors and Windows of civil construction should be installed.
2. The TSM Waterproof outdoor Distribution Box is installed, and the electric meter box is installed and positioned.
3. Dredge the pipe again. When threading wires, match colors according to specifications. Live wire A, B, and C are yellow, green, and red, respectively. Neutral wire is light blue, and ground wire is yellow and green. The length of wire into the box is two thirds of the box perimeter, and the power supply line is on the same side of the main switch, which can be appropriately shorter, depending on the actual situation. After entering the box, label the name and purpose of the cables of each distribution loop. Only when connecting cables, they can correspond to each distribution switch.
(ii)TSM Waterproof outdoor Distribution Box Installation and wiring stage:
After threading is completed, wiring can be installed, but it is best to carry out after whitewashing the wall. Before installation, clean up the garbage in the box first, then install the switch and its base at the bottom of the box, and then install the zero line terminal block and ground line terminal block, and then wire connection.
Wiring must be carried out in accordance with the principle of beautiful and generous:
1. Label the three leads of each power distribution loop with their names and uses
2. Then straighten and straighten the wires, so that no zigzagging phenomenon can be seen
3. Route cables in groups and layers, namely, centralize neutral, live, and ground lines respectively.
4. Follow the horizontal, horizontal and vertical principle to zero line row, separate close, ground line row;
5 Measure the length to the wiring position, cut the wire, peel off the insulation skin of the wiring position, finally insert the conductor part of the wire into the wiring position, press tightly, but do not press the insulation skin, do not expose the conductor.
6. When wiring, only one wire is pressed by one wire hole, not more than one wire by one hole.
FAQ
Q:Does the product support customization?
A:It can be customized according to your needs.
Q：Is the quality guaranteed?
A：Our products are through according to IEC standard and with CE, RoHS, HF and ISO9001 certification.
Hot Tags: tsm waterproof outdoor distribution box, suppliers, manufacturers, factory, customized, wholesale, price, for sale, free sample
