Introduction
Industrial consumer unit which is suitable for all kinds of residential house, villas, residential areas, etc, which is divided into surface and flush mounting installation and accord with EC 60439-3 international standard. The box body and panel are made of flame retardant ABS material. The small circular arc door can open up to 90 degrees. With galvanized din rail and adjustable support, the depth of din rail can be adjusted to install different size MCB and RCD.
Its panel layout is reasonable, and it can integrate start, stop, emergency stop, speed control and other shortcut buttons and touch screen display interface, which is convenient for timely monitoring and operation. The conforms to the standard of electrical wiring, reasonable layout in the cabinet and convenient installation of components. Its core components use well-known brands to ensure the source of genuine goods.
NUM:TSM-2/4/6/8/12
CLASS:Consumer Units
Outline And Installation Dimensions
Installation Instructions
Product | Model | DB Box | 2P 63/100A | 1P 10A C65N | 1P 16A C65N | 1P 20A C65N | 1P 25A C65N | 1P 32A C65N | 1P 50A C65N | 1.2mm Bus bar | 10mm² wire |
TSM-2 | 4way box | 1PCS | 1PCS | 1PCS | - | - | - | - | 1PCS | 1PCS | |
TSM-4 | 6way box | 1PCS | 1PCS | 1PCS | 1PCS | 1PCS | - | - | 1PCS | 1PCS | |
TSM-6 | 8way box | 1PCS | 1PCS | 1PCS | 1PCS | 1PCS | 1PCS | 1PCS | 1PCS | 1PCS | |
TSM-8 | 10way box | 1PCS | 1PCS | 1PCS | 1PCS | 1PCS | 2PCS | 2PCS | 1PCS | 1PCS | |
TSM-10 | 12way box | 1PCS | 1PCS | 1PCS | 2PCS | 2PCS | 2PCS | 2PCS | 1PCS | 1PCS | |
TSM-12 | 18way box | 1PCS | 2PCS | 2PCS | 2PCS | 2PCS | 2PCS | 2PCS | 1PCS | 1PCS |
Our exhibition
The power distribution box miniature Consumer Unit is a massive parameter on the data. Generally, it constitutes a low -voltage forest according to electrical wiring. It is required to assemble the switching equipment, measuring instrument, protecting electrical appliances and auxiliary equipment in a closed or semi -closed metal cabinet. box. When running normally, you can use manual or automatic switch to connect or break the circuit.
The power distribution box has small volume, easy installation, special technical performance, fixed position, unique configuration function, unrestrained venue, common application, stable and reliable operation, high spatial utilization rate, small area, and environmental protection effects.
Classification according to structural characteristics and use:
(1) Fixed panel switch cabinet, often called switch panels or power distribution miniature Consumer Unit screens. It is an open switch cabinet with panel cover. It has a protective effect on the front. The back and side can still be touched by the charging part. The protection level is low. Concentrated power supply for the substation.
(2) The protective (closed) switch cabinet refers to a low -voltage switch cabinet that is closed outside the installation surface. The electrical components such as switching, protection and monitoring and control of this cabinet are installed in a closed shell made of steel or insulating material, and the reliable wall or leave wall is installed.
There can be no isolation measures between each loop in the cabinet, or you can use the grounded metal plate or insulating plate for isolation. Usually, the door and the main switching operation are mechanically chased. There are also protective table switch cabinets (that is, console), and panels are equipped with electrical appliances such as control, measurement, signal. The protective switch cabinet is mainly used as a power distribution device at the process site.
(3) Draw -type switch cabinet. This type of switching cabinet is made of a closed shell with steel plates. Electric components that enter and exit the line circuit are installed in drawers that can be pulled out, forming a functional unit that can complete a certain type of power supply task. Between the function unit and the bus or cable, the functional board made of ground or plastic is separated to form three areas: parent line, functional unit and cable.
There are also isolation measures between each functional unit. The drawer switch cabinet has high reliability, safety and interchangeability. It is a relatively advanced switch cabinet. Most of the switching cabinets refer to the drawer switch cabinet. They are suitable for industrial and mining enterprises and high -rise buildings that require high power supply reliability as a centralized power distribution center.
(4) Power and lighting power distribution control box. Most of the closed vertical installation. Due to different uses, the shell protection level is also different. They are mainly used as power distribution devices at the production site of industrial and mining enterprises.
Hot Tags: miniature consumer unit, suppliers, manufacturers, factory, customized, wholesale, price, for sale, free sample, 3 way outdoor junction box, IP65 Junction Box, leach line distribution box, small round electrical box, pvc enclosure box, Waterproof Window For Outdoor Junction Box