junction box abs ip65 Introduction:
Made of strengthening ABS and PC material, the enclosure has beautiful appearance, high plasticity and doggedness. LWHY series junction box is suitable for terminal boxes, distribution panels, instrument boxes, electrical equipment boxes and control boxes. Moreover, it is simple and easy to use.The plastic plate makes it convenient to install all kinds of electronic components in the enclosure.The four corners of the box have mounting screw holes for the installation of wall brackets, which can be better installed on the wall under the premise of ensuring the waterproof capacity of the box.
Installation instructions for waterproof cable junction box:
1. Peel off the cable to be connected. The length should be less than the length of the box.
2. Waterproof cable selection requires a connection mode, branch or docking, it is recommended to use yongfangda IPC insulated puncture cable clip;
3. Wrap the sponge strips around both ends of the cable connection, and close the mold box;
4. Mix the resin glue of group A and B in A certain proportion, stir well and pour into the mold box, and the installation is completed;
5. Resin curing speed is related to temperature, the higher the temperature, the faster the curing, about one hour at room temperature, in the process of using and filling resin must pay attention to the following matters:
1), waterproof cable must be fully uniform deployment of resin A, B material.
2) Immediately pour the prepared resin into the branch box, if the delay is too long, it is easy to make the resin thicken or even cure.
3) It is best to wear gloves when installing waterproof cables.
4), the construction site should maintain good ventilation conditions.
5) Avoid direct contact between skin and eyes and resin. In case of accidental contact with eyes, please rinse with plenty of water and seek medical treatment.
6) The unperfused resin shall be placed in a cool and ventilated place. The resin shall not be exposed to the sun or put together with other blood activating products.
7) After filling, throw all the garbage into the trash can.
Issues to be considered in the design of waterproof junction box:
junction box abs ip65 Selection of materials: the current waterproof junction box products are mainly used in the harsh environment of the site and open field. When considering the safety performance of the product, the impact resistance, static load strength, insulation property, non-toxic property, anti-aging property, corrosion resistance and flame retardant property of the material should be considered. (Non-toxic performance has been widely concerned, mainly because if the waterproof junction box products in the case of fire, combustion will not release toxic and harmful gas, generally in the fire is often due to the inhalation of a large number of toxic gas and death account for the majority.
Hot Tags: junction box abs ip65, suppliers, manufacturers, factory, customized, wholesale, price, for sale, free sample, Distribution box electrical, cortem junction box, outdoor connector box, 12x12x6 junction box, junction box waterproof, ip65 enclosure box
