Introduction
Power Distribution Equipment is a classic power distribution box that can be equipped with various modular electrical appliances to play the role of terminal power distribution. Our product has a variety of installation methods, which can be directly installed and hung on the wall, or can be embedded in the wall for installation. This equipment has a wide range of applications and is suitable for low-voltage distribution networks to supply power to consumers and commercial buildings.
NUM：LWDF-2
CLASS：LWDF&LWDS / LWDFT&LWDST
Technical Specifications
Installation Instructions
Accessories Introduction
Din-rail
| ▼ Width: 35mm (standard) ▼ Length: see in table ▼ Material: Iron galvanized zinc ▼ Thickness 1.0mm (customizable) |
Terminal bar
| ▼ Width: 6mm ▼ Height: 8mm ▼ Size: M4*7 ▼ Numbers: see in table ▼ Material: copper/brass |
Adjustable Support
| ▼ Size: suitable for 35mm din rail ▼ Material: ABS/PP ▼ Steps: suitable for 35mm din rail ▼ Product model guide rail is shown in the table below |
Loop Sticker
| ▼Material: PVC ▼Function: mark the power control ▼Usage: adhesive sticker |
Busbar
| ▼Material: brass ▼Type: pin type/fork type ▼Length: customizable |
Product | Model | Din-rail (mm) | Terminal bar | (P)L*W*H (mm) | QTY/CTN | (C)L*W*H (mm) |
| LWDF-2 | -- | — | 65*138*85 200 | 200 | 715*555*440 |
| LWDF-4 | 99 | 3+3 | 135*211*86 30 | 30 | 525*440*470 |
| LWDFT-4 | — | 5 | 110*185*105 30 | 30 | 575*440*480 | |
| LWDF-6 | 132 | 3+3 | 171*211*86 30 | 30 | 530*465*545 |
| LWDFT-6 | -- | 5 | 145*185*105 30 | 30 | 575*440*480 | |
| LWDF-8 | 168 | 4+4 | 209*221*86 20 | 20 | 530*430*475 |
| LWDFT-8 | — | 5 | 180*185*100 20 | 20 | 575*430*480 | |
| LWDF-10 | 204 | 7+3 | 248*221*86 20 | 20 | 490*475*515 |
| LWDFT-10 | — | 9+9 | - 20 | 20 | 575*430*480 | |
| LWDF-12 | 240 | 8+4 | 280*211*86 20 | 20 | 525*465*595 |
| LWDFT-12 | — | 4+4+6 | 250*185*105 20 | 20 | 550*360*470 | |
| LWDF-15 | 296 | 8+7 | 340*221*86 15 | 15 | 550*365*705 |
| LWDFT-15 | — | 9+9 | - 15 | 15 | 570*420*530 | |
| LWDF-18 | 351 | 9+9 | 395*249*95 10 | 10 | 500*420*525 |
| LWDFT-18 | — | 4+4+6 | 360*220*95 10 | 10 | 570*420*530 | |
| LWDF-24 | 240 | 8+4 8+4 | 300*345*95 10 | 10 | 560*370*645 |
| LWDFT-24 | -- | 4+4+6 4+4+6 | 250*315*95 10 | 10 | 570*320*360 | |
| LWDF-36 | 240 | 8+4 8+4 | 300*480*95 5 | 5 | 520*320*515 |
| LWDFT-36 | -- | 4+4+6 4+4+6 | 360*330*100 5 | 5 | 575*435*420 |
Product | Model | Din-rail (mm) | Terminal bar | (P)L*W*H (mm) | QTY/CTN | (C)L*W*H (mm) |
| LWDS-2 | -- | — | 50*130*85 | 200 | 715*555*440 |
| LWDS-4 | 70 | 3+3 | 113*198*95 | 30 | 525*440*470 |
| LWDST-4 | — | 5 | 130*117*100 | 30 | 575*440*480 | |
| LWDS-6 | 108 | 3+3 | 148*198*95 | 30 | 530*465*545 |
| LWDST-6 | -- | 5 | 160*215*100 | 30 | 575*440*480 | |
| LWDS-8 | 144 | 4+4 | 185*198*95 | 20 | 530*430*475 |
| LWDST-8 | — | 5 | 200*215*100 | 20 | 575*430*480 | |
| LWDS-10 | 180 | 7+3 | 219*198*95 | 20 | 490*475*515 |
| LWDFS-10 | — | 9+9 | — | 20 | 575*430*480 | |
| LWDS-12 | 215 | 8+4 | 258*198*95 | 20 | 525*465*595 |
| LWDST-12 | — | 4+4+6 | 235*215*100 | 20 | 550*360*470 | |
| LWDS-15 | 272 | 8+7 | 310*198*95 | 15 | 550*365*705 |
| LWDST-15 | — | 9+9 | — | 15 | 570*420*530 | |
| LWDS-18 | 316 | 9+9 | 361*220*99 | 10 | 500*420*525 |
| LWDST-18 | — | 4+4+6 | 390*240*95 | 10 | 570*420*530 | |
| LWDS-24 | 215 | 8+4 8+4 | 271*326*99 | 10 | 560*370*645 |
| LWDST-24 | -- | 4+4+6 4+4+6 | 270*335*95 | 10 | 570*320*360 | |
| LWDS-36 | 215 | 8+4 8+4 | 267*459*103 | 5 | 520*320*515 |
| LWDST-36 | -- | 4+4+6 4+4+6 | 405*370*100 | 5 | 575*435*420 |
Cooperation partners
1.Types and functions of power electrical distribution box control cabinet
Frequency conversion control cabinet Frequency conversion control cabinet
It is mainly used to adjust the working frequency of the equipment, reduce the energy loss, can start the equipment smoothly, reduce the damage to the motor caused by the large current when the equipment is started directly. With analog input (speed control or feedback signal),PID control, pump switch control (for constant pressure), communication function, macro function (for different occasions have different parameter Settings), multi-speed and so on. It can be widely used in industrial and agricultural production and automatic control of water supply, drainage, fire fighting, pressurization of spray pipe network and hot and cold water circulation of HVAC and other occasions.
2.Soft start control cabinet Soft start control cabinet
Mainly reduce the starting current of the motor, reduce the distribution capacity, avoid capacity investment, reduce the starting stress, prolong the service life of the motor and related equipment. With a variety of starting modes and a wide range of current, voltage and other Settings, can adapt to a variety of load conditions. Can be widely used in fans, pumps, conveying and compressor loads.
3. Sewage discharge control cabinet
The sewage discharge control cabinet has the protection functions of overload, short circuit and phase loss protection. It has a compact structure, stable work, complete functions. With single pump and multi-pump control mode, with rotation and circulation function. When used together with the liquid level switch, it can realize the control system which can automatically control the start and stop of the equipment according to the change of liquid level. It is widely used in electric power, metallurgy, chemical industry, papermaking, environmental protection sewage treatment and other industries.
4.Fire control cabinet Fire control cabinet is in accordance with the national fire protection standard GBJ16-87 "Code for Fire Protection in Building Design" and GB50045-95 The design and production of waterproof code for high-rise Civil buildings is dedicated to the control of water supply pumps for high and low level industries, civil buildings, fire fighting, spraying, water curtain, drenching, fire control pipe network, pressurization and so on, which can meet the requirements of users for the control of various fire pumps.
5. environmental focus on environmental protection engineering centralized control cabinet is mainly used for centralized control of all kinds of equipment in the environmental protection engineering, easy to focus on the operating condition of equipment, reduce costs at the same time, the control cabinet is mainly used for cleaning and sewage treatment, it combines a variety of digital display meter and ultrasonic, PH meter, flow meter, such as sensors, processing of the sewage automatic, and Make us in the treatment of sewage at the same time also can more clearly understand the water quality. power electrical distribution box Application: used in various environmental protection projects.
FAQ
Q：What is LWDF?
A：It is flush mounted distribution box
Q： What is LWDS？
A： It is surface mounted distribution box
Q：what is the IP grade of LWDS/LWDF?
A：IP40
Q：What is width of din rail?
A：35MM
Q：what is the material of din rail？
A：Galvanized steel /aluminum
Q：What is the material of door of LWDS/LWDF？
A：PC material
Q：How many kinds of door of LWDS/LWDF？
A：Transparent door and obstacle door
Q : What kinds of junction boxes are there?
A: Four types, LWBA&BT, LWHI, LWHY, LWAZ
Q: Are all junction boxes waterproof?
A: No, LWAZ is not waterproof
Q: What are the models of classic distribution boxes?
A:2.4.6.8.10.12.15.18.24.36
Q: What are the accessories inside the classic distribution box?
A: Guide rails, terminals, busbars, circuit stickers
Q: What is the material of the classic distribution box?
A: ABS, HIPSA, HIPSB
Q: What is the installation method of the classic distribution box?
A: Open installation and concealed installation
Q: What is the protection level of the classic distribution box?
A: IP40
Q: What is the width of the guide rail?
A: 35mm
Hot Tags: power electrical distribution box, suppliers, manufacturers, factory, customized, wholesale, price, for sale, free sample
